Home > Ceiling/Wall Mounts > Draper Projector Ceiling Lifts > Scissor Projector Lift

Draper Ceiling Recessed Scissor Lift for LCD/DLP Projectors

Description

Draper's Scissor Lift accommodates most video and LCD projectors and is available in 14 models. Select a model based on the maximum lowering distance needed. Three sets of scissors stabilize projector laterally and front-to-back.

Aero Low Profile Lift Bracket (optional)

• Places top of projector bracket only 3-3/16" from the ceiling line or projector lift.
• Ball joint at tip of column allows instant registration of the projected image and adjusts infinitely through 30° pitch, 30° roll and 360° yaw.
• Mount directly to ceiling or use in Draper's LCD Lift, Scissor Lift or Micro Projector Lift
• Once image is precisely registered on screen, lock the ball joint
• Draper's unique slide-on bracket installs in seconds and also locks in place
• Matt black epoxy powdercoat finish.
• Maximum load is 26 lbs.
• Warranted for one year against defects in materials and workmanship.

Features

• Draper’s Scissor Lift and Scissor Lift SLX not only conceal your projector above the ceiling and set it exactly where you need it at presentation time, they also bring it down to within easy reach for service
• Draper positions the lift to your specifications
• Choose from seven models with service positions ranging from 4 to 15 feet
• Scissors on the left, right and back sides of the unit stabilize the projector from any sway both laterally and front–to–back resulting in quiet, fluid movement of the Scissor Lift. No other manufacturer offers you 3 sets of scissors and this much stability.
• Features a small footprint: 23" wide x 23½" deep, or 27" x 29½" for the SLX Series
• Projectors can be bolted directly to the lift’s bottom pan, or mounted with the projector’s standard ceiling mounting bracket
• Each lift is equipped with a fail safe inertial safety belt system with air craft cables and a Cable Management System that includes a pre–wired power cable on the back scissor, bringing 110v current right to your projector.
• Optional Decorative Cover Covers scissor arms and protects from dust
• Optional universal steel ceiling closure with a recess to accept ceiling tile, or with a smooth surface finished in white baked enamel. 
• Optional factory installed hookup for RGB, Video and Sync.
• An optional plenum enclosure is also available.
• Optional ceiling access door provides access when unit it installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
• Can be independently operated using Draper’s motorized lift controls
• Can be used with Aero Low Profile Lift Bracket
• Warranted for one year against defects in materials and workmanship.