Home > Ceiling/Wall Mounts > Draper Projector Ceiling Lifts > Micro Projector Lift

Draper Ceiling Recessed Micro Projector Lift for LCD/DLP Video Projectors

Description

Designed specifically for today's smaller, lighter projectors in mind, Draper's MPL fits within an existing ceiling grid. Three sets of scissors stabilize projector laterally and front-to-back, while a tubular motor lowers the unit up to 48" into the room using tough Kevlar straps. Lifting capacity 35 lbs.

Aero Low Profile Lift Bracket (optional)

• Places top of projector bracket only 3-3/16" from the ceiling line or projector lift.
• Ball joint at tip of column allows instant registration of the projected image and adjusts infinitely through 30° pitch, 30° roll and 360° yaw.
• Mount directly to ceiling or use in Draper's LCD Lift, Scissor Lift or Micro Projector Lift
• Once image is precisely registered on screen, lock the ball joint
• Draper's unique slide-on bracket installs in seconds and also locks in place
• Matt black epoxy powdercoat finish.
• Maximum load is 26 lbs.
• Warranted for one year against defects in materials and workmanship.

Features

• The Micro Projector Lift (MPL) is small and convenient, just like the projectors it is designed to accommodate.
• Weighs only 35 lbs (13 kg.)
• The closed height of the lifting unit is only 5" (13 cm) tall (not including projector mounting mechanism or closure), so just a minimal amount of overhead ceiling space is required.
• Maximum extension is 4' (1.2 meters)
• All components can be serviced from below the unit, so the ceiling need never be opened
• Projector’s "show" position can be set at any point—with infinite adjustability—up to extension
• Patented 3-scissor design
• Compact side folding scissor
• Scissors made of injection molded nylon with long glass fiber reinforcement
• Available with 110 or 220 volt motor. (Transformer not required.)
• Optional ceiling access door provides access when unit is installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling
• Can be independently operated using Draper’s motorized lift controls
• Can be used with our Aero Low Profile Lift Bracket
• Warranted for one year against defects in materials and workmanship