|
| |
|
Home >
Ceiling/Wall Mounts > Draper Projector Ceiling Lifts
> LCD Lift
Draper Ceiling Recessed LCD Lift for LCD/DLP Projectors
|
Click For Larger Image
|
Item Currently Unavailable
|
| |
Description
Draper's LCD Lift is compact, lightweight and accommodates
most LCD/DLP projectors. Bomb bay doors open into the room,
and the projector descends from the lift's travelling pan.
Aero Low Profile Lift Bracket (optional)
- Fixed projector mount for "low profile" ceiling installations with our
Aero Universal Projector Bracket. (standard)
- Places top of projector only 4-7/8" from ceiling. May vary slightly
according to choice of projector.
- Ball joint at tip of column adjusts infinitely up to 30° pitch, 30° roll and 360° rotation.
- Mount directly to ceiling or use in Draper's LCD Lift, Scissor Lift, or
Micro Projector Lift.
- Once image is precisely registered on screen, lock the ball joint.
- Black powder coat finish.
- Maximum load is 26 lbs.
- Warranted for one year against defects in materials and workmanship.
|
|
Features
- Model A can accommodate projectors up to
11" x 18" x 18", weighing less than 65 lbs.
- Model B can accommodate projectors up to
16" x 23" x 23", weighing less than 65 lbs.
- Bomb bay doors and a slim cross-section
distinguish the LCD projector lift
- Housing of aluminum, with doors finished
in ceiling white
- Contains two 110v power outlets
- Contains current sensor that
requires projector to cool before retracting
- A flat ceiling closure, similar to that
furnished for the Scissor Lift, is optionally available
- Can be used with Aero Low Profile Lift
Bracket
- Can be independently operated using
Draper's motorized lift controls
- Optional ceiling access door provides
access when unit is installed above hard ceiling and access to the
projector from above is not convenient. Available with a metal finish to
be painted by ceiling contractor, or to accept ceiling material to match
the surrounding ceiling
- Warranted for one year against defects
in materials and workmanship
|
|
Lift Accessories
|
Part No. |
Price
|
|
110 - 120V Controls |
|
Replacement single station
wall switch (SS-1R) |
121046 |
$32.00 |
|
*Low Voltage Control (24v) |
|
L.V. control module, no
switches (LVC-III) |
121056 |
$120.00 |
|
Single station, L.V. control (LVC-III
& LVC-S) |
121057
|
$146.00 |
|
2-station L.V. control (LVC-III
& 2 LVC-S) |
121058
|
$172.00 |
|
Additional L.V. control
stations (LVC-S) |
121059
|
$32.00 |
|
*Wireless Transmitter/Receiver RF type (WRT/R) |
121062
|
$145.00 |
|
Extra wireless transmitter RF type (WRT) |
121063
|
$88.00 |
|
*Infared Remote
Transmitter/Receiver (IRT/R) |
121065
|
$59.00 |
|
Extra IR remote transmitter (IRT) |
121066
|
$42.00 |
|
*Note - You must have low
voltage control module (LVC-III) to use either RF or IR
wireless control. Wireless receiver plugs into LVC-III. You
must also have LVC-III if you are using an MPL in
conjunction with a Crestron/AMX master control system. |
|
Key Operated Switches |
|
Power Supply switch on-off (KS-1) |
121017
|
$47.00 |
|
Video Interface Control |
|
For LCD Lift (VIC-115) |
121026 |
$78.00 |
|
Ceiling Access Doors |
|
If you plan to install your
Draper Video Projector Lift above a finished ceiling, these
access doors provide above-the-ceiling, maintenance or
repairs without having to damage the ceiling. |
300008 |
$300.00 |
|
Through the use of Video Interface Control, you can link the operation of
any Draper LCD Lift or Scissor Lift with a Draper
electric screen and a video projector. The Scissor Lift is equipped with a
continuously powered 110-120v power cord for connection to the projector.
The Video Interface Control must also be connected to a continuously powered
110-120v outlet. |
|
|
