Aero
T4 Ceiling Mount Formed entirely of heavy gauge steel, the Aero T4 ceiling mount enables a plasma display to be installed with the top of the image virtually flush with the ceiling line.
Aero
C/F3000 Ceiling-to-Floor Mount Features a 118" extruded aluminum column with sturdy steel swivel mounts for attachment to ceiling and floor. The C/F3000 will accommodate up to three plasma displays mounted horizontally or two vertically.
Aero
C490 Ceiling Mount Suspends a plasma display from a 19" long extruded aluminum column mounted to a heavy gauge steel ceiling bracket. Display can be raised and lowered on column over a 6" range in 2" increments. *Note: C490 and C1150 do not have cable management.
Aero
C1150 Ceiling Mount
Offers all the features and benefits of the C490 plus a greater vertical extension due to its 45" long extruded aluminum column. Display can be raised and lowered on column over a 6" range in 2" increments. *Note: C490 and C1150 do not have cable management.
Aero
CD490 Dual Ceiling Mount
Same as C490 but accommodates two displays back to back. Display can be raised and lowered on column over a 6" range in 2" increments. *Note-CD490 and CD1150 do not have a concealed electrical panel or cable management.
Aero
CD1150 Dual Ceiling Mount
Same as C1150 but accommodates two displays back to back. It is also similar to the Aero CD490, but offers a longer, 45" column. Display can be raised and lowered on column over a 6" range in 2" increments. *Note-CD490 and CD1150 do not have a concealed electrical panel or cable management.
Aero
C Basic Ceiling Mount
Pipe-style ceiling mount allows up to 24" of vertical adjustability in 4" increments. Column has built-in cable management system; all wires/cables are discreetly concealed in the cylinder. Handles displays up to 61" diagonal.
Aero
V4 Wall Mount
Articulating swivel mount extends the plasma display up to 30" from the wall. the V4 swivels and rotates the display in all directions, limited only by the wall. Formed entirely of heavy gauge steel.
Aero
W490 Wall Mount
Column attaches to the wall with heavy gauge steel plates. Built-in cable management and a concealed 2 socket electrical panel with power cord and plug. Plasma display height adjustments in 2" increments.
Aero
W1150 Wall Mount
Offers all the features and benefits of the W490. In addition, the plasma display can also be raised and lowered over a 26" range. Either one or two displays can be mounted horizontally or one plasma display vertically.
Aero
W/F2000 Wall-to-Floor Mount
You can mount up to three plasma displays horizontally, or either one or two vertically. Displays can be raised over a 58" range. When mounted horizontally, plasma display can be tilted up to 15 degrees.
